DOC-USR-0135-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
38
6.15
Record to USB
The Z3-SBE264-10 supports writing encoded video to a storage device connected to the USB port in .ts
file format.
(1)
Connect a USB flash drive or other USB storage device to “USB” on the back of the encoder.
*Note:
The USB drive must be formatted in either FAT32, VFAT, EXT3, or EXT4 format.
(2)
Return to the user interface channel tab and select “TSFILE” from the “Output Format” dropdown
menu.
(3)
The “Output Device” and “File Prefix” fields appear. Click on the “Output Device” field to select
your USB storage location. This will automatically populate if a USB is detected.
(4)
In the “File Prefix” textbox, enter the desired prefix for your .ts file name.
(a)
When saved, a number will be automatically generated and added to the end of the file
prefix, starting with zero. If subsequent recordings are made to the same USB, existing
files with the same prefix will be detected and the new recordings will auto-increment
to the next number.
(b)
For example, by default, the prefix “MOV” is provided. This will result in a file entitled
“MOV0.ts” on the USB. Subsequent recordings will be entitled “MOV1.ts”, “MOV2.ts”,
etc.
(5)
When finished, click the eject button next to the “Output Device” field. An alert will appear when
the USB is able to be removed safely.
Figure 39 CH1 Tab Configuration – TSFILE
(1) Set to “TSFILE”
(3) When finished,
click the eject
button
(2) Set File Prefix
