13
CONFIDENTIAL
DOC-USR-0054-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(12)
The encoder may have already started (after 20 seconds, the encoder will automatically try to
start). If it has, click on “stop” near the bottom of the screen. The status should then change to
“STOPPED.” Then click “start.” Once you do this, the status will change to “RUNNING.” If the
encoder hadn’t started already, simply click on “start” and observe the status change:
(2) Status changes to
“STOPPED”
(3) Click “start”
(1) If necessary, click “stop”
Figure 10 Z3-DME-02 – Start/Stop/Status Section
