Z3 Technology Z3-DM816X-PCI2-RPS, Руководство разработчика

Страница: 9 / 40

CONFIDENTIAL Z3-DM816X-PCI2-RPS V2.00.00
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
9
4. Standalone Operation
Standalone operation of the Z3-DM816X-PCI2-RPS is enabled through the Z3-DM8168-DEB-02 (or Z3-DEBUG-
02) adapter board (
Figure 3
). This board allows the user to power the board using the standard 12V power
supply shipped with the Z3-DM816X-PCI2-RPS. It connects to the Z3-DM8168-APP-41 board using a 6-pin
connector located at J25 (
Figure 4
). To attach, carefully insert the connector into the pins, applying even
pressure until the connector is even with the socket at J25.
Note : Once the Z3-DM8168-DEB-02 is connected to the Z3-DM8168-APP-41, it is recommended that the 2
boards stay connected. If you must disconnect the boards, you can do so very gently using a needle-nose
pliers to grab either side of the plastic header and then gently pulling upward to separate. Do not pull on
the gray ribbon. Pulling on the gray ribbon increases the chance of breaking the wires.
Figure 4 Connection Point to the Z3-DM8168-DEB-02
Connect here
Figure 3 Z3-DM8168-DEB-02 Power Adapter Board