CONFIDENTIAL
Z3-DM816X-PCI2-RPS V2.00.00
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
18
7.5 Ensure your PC has a proper IP address
(8) To be able to communicate with the board, the PC that you are communicating from needs to have the
same first 2 parts of the IP address. For example, if the board has an IP address of 192.168.0.81, your
PC would need to have an address of 192.168.x.y, where y is anything but 81 (and not conflicting with
whatever is on your current network, of course). Ensure that this is the case. If necessary, use the “P”
and “N” options to modify the address/network of the board to conform to your network. Note that
the first 2 parts being the same are based on a value of netmask of 255.255.0.0. If netmask were
255.255.255.0 (as it is in the previous screenshot), for example, then the first 3 parts of the IP address
would have to be the same.
After you are done, make note of the address you set it to. This will be important in the streaming
step.
7.6 Run the Web Interface to Configure CH1
(9) In your PC, run a web browser (for best results, Z3 recommends FireFox or Chrome). In this browser,
type the IP address of the board noted in step (7) (for example, if the default value is used, it would
be
). After about 3 seconds, the control menu should come up:
Figure 8 Web Interface Initial Screen
