CONFIDENTIAL
Z3-DM816X-PCI2-RPS V2.00.00
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
32
setting z3_edma_mem_size to 10485760
Memory policy: ECC disabled, Data cache writeback OMAP chip is TI8168 2.0 Built 1
zonelists in Zone order, mobility grouping on. Total pages: 57088 Kernel command line:
console=ttyO2,115200 ddr_mem=1024M mem=256M vram=20M earlyprintk z3dram=1024M
notifyk.vpssm3_sva=0xbee00000 noinitro PID hash table entries: 1024 (order: 0, 4096
bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash
table entries: 16384 (order: 4, 65536 bytes)
Memory: 224MB 1MB = 225MB total
Memory: 222840k/222840k available, 39304k reserved, 0K highmem Virtual kernel memory
layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA
: 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) lowmem :
0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules :
0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc003f000 ( 220 kB) .text :
0xc003f000 - 0xc04a8000 (4516 kB) .data : 0xc04a8000 - 0xc04ec0c0 ( 273 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:375
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts Total of 128
interrupts on 1 active controller GPMC revision 6.0 Trying to install interrupt handler
for IRQ368 Trying to install interrupt handler for IRQ369 Trying to install interrupt
handler for IRQ370 Trying to install interrupt handler for IRQ371 Trying to install
interrupt handler for IRQ372 Trying to install interrupt handler for IRQ373 Trying to
install interrupt handler for IRQ374 Trying to install type control for IRQ375 Trying to
set irq flags for IRQ375 OMAP clockevent source: GPTIMER1 at 27000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 1346.76 BogoMIPS (lpj=6733824)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
TI81XX: Map 0x8ff00000 to 0xfe500000 for dram barrier
TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
omap_voltage_early_init: voltage driver support not added
regulator: core version 0.5
regulator: dummy:
NET: Registered protocol family 16
omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
omap_voltage_add_dev: VDD specified does not exist!
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
evm_init_begin
omap_mux_init: Add partition: #1: core, flags: 0
_omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
_omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
*********** z3_fpga_init returns 0
Cannot clk_get ck_32
pm_dbg_init: only OMAP3 supported
registered ti81xx_vpss device
registered ti81xx_vidout device
registered ti81xx on-chip HDMI device
registered ti81xx_fb device
registered ti81xx_vin device
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
