CONFIDENTIAL
DOC-USR-0030-12
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
40
(7)
Click on the “CH1” tab and change the settings to match the following configuration:
(8)
If you haven’t already, go back to the Encoder board and click “start”.
(9)
The decoder then initializes the SDI output. About 5-10 seconds later, decode should start and
you should see a picture / hear audio.
(10)
You can also view the content using VLC. Open VLC as you did in the Encode instructions and use
the address “udp://@225.1.2.3:5004” for the URL.
(3) Change to 5004
(2) Change to 225.1.2.3
(4) Click “start”
Figure 35 Decoder Configuration Settings for Decode Example
(1) Change to “UDP”
