CONFIDENTIAL
DOC-USR-0030-12
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
23
(11)
You should see the Channel 1 configuration tab (see Figure 8). In this tab, change Video
Resolution to “1920x1080”, set Output Format to “UDP,” and Dest Address to the IP address of
your PC (in this example, 192.168.0.6). Also make note of the value of “Dest Port” (should be
5004 by default).
*
Note
:
If you want to encode 1080p60, you must first change “Operating Mode” at the bottom right
from “Encode Interlaced/Progressive” to “Encode Single Ch No Scale.” Note that, in “Encode Single
Ch No Scale” mode, only CH1 can be used.
Figure 8 Channel 1 Configuration Screen for UDP
(5) Click “stop” if
already started,
then click “start”
(2) Change
to UDP
(3) Change to IP
Address of your PC
(4) Check value of
“Dest Port”
(1) Change to
“1920x1080” or
“Follow input”
