HE2K-MINI-RPS User Guide
DOC-USR-0232-02
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
81
Channel Controls
Stop Button
Stop current encode session for Channel 1. Encode
must be stopped in order for settings to be altered.
Start Button
Start encode session for Channel 1.
Delete Button
Removes channel instance for encoding.
status
!Not running, IDLE,
STOPPED, RUNNING,
POLLING
Current status of the encode process.
IDLE
indicates no valid input data is present.
STOPPED
indicates that the unit is not currently
encoding. Must be in this mode to make any
configuration changes.
POLLING
indicates “start” was pressed and the
encoder is waiting for valid input data to be
detected.
RUNNING
indicates the unit is currently encoding.
Error statuses will be preceded by an exclamation
point and include a description of the error.
Note 1: Encode Resolutions Supported:
1080p (2MP), 1280x1024, 720p (1MP), 480p, 576p, 1024x576, 704x576, 640x480, 640x360, 420x380,
352x576, 352x288, 352x240, 320x240, and 320x180
Follow input
“Follow input” = Generate encoder resolution based on capture resolution detected
11.7
The CH2 & CH3 Tabs (Channels 2 & 3)
The HE2K-MINI-RPS supports simultaneous encode into multiple different resolutions and bitrates. Each
output stream can be set using a separate Channel tab. See the CH1 Tab section for detailed descriptions
of available settings on the CH2 and CH3 tab. If these tabs are not present, you can create a them by
clicking on the “+” tab. Only three channels are supported.
The maximum performance for two channels is one 1080p60 plus one 720p60 stream.
