HE2K-MINI-RPS User Guide
DOC-USR-0232-02
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
38
7.7
Setting NTP
The HE2K-MINI-RPS has support for NTP to set the time on the unit. If you require the system time to be
set do the following
(1)
Load the web UI of the unit and switch to the System Setup tab. Click the go button next to Set NTP.
(2)
Select TRUE from the Enable NTP dropdown.
(3)
Select the desired timezone for the unit form the Time Zone dropdown.
(4)
Enter an NTP server address. The default is 128.138.141.172 (NIST).
(5)
Click the change button. NTP is now enabled and your system clock will be adjusted.
Figure 32 Setting up NTP
7.8
Settings IEEE-1588 PTP
The HE2K-MINI-RPS has support for IEEE-1588 PTP to either set the time on the unit to a server or act as
a server itself to provide time to an entire network. If you require the system time to be set via PTP, do
the following:
(1)
Load the web UI of the unit and switch to the System Setup tab. Click the go button next to
“Time
Settings”
.
(2)
Select
“IEEE 1588 PTP” from the “Enable Time Service”
dropdown.
(3)
Select the desired timezone for the unit form the Time Zone dropdown.
(4)
Choose the server/client role of the system. The default is “Auto”, which will automatically detect a
PTP server on the network if there is one.
(5)
Click the change button. PTP is now enabled and your system clock will be adjusted.
