FV4K-1XA User Guide
DOC-USR-0268-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
86
Video Bitrate
2K
–
40M (
2M
)
Textbox for entering video bitrate.
Output Setup
Channel 1 PIP
Enable
True
False
Enables a picture in picture in channel 1 of the same size as the
Output Resolution on the channel 2 tab.
CH3 Defaults:
Parameter
Options (default
in bold)
Description
Encoder Setup
Output
Resolution
320x180
–
1920x1080
(720-480)
Follow Input
The encode resolution. If this resolution is different from the
capture resolution (1920x1080), resizing will occur.
Video Bitrate
2K
–
40M (
2M
)
Textbox for entering video bitrate.
10.9
Values Appearing at the Bottom of All Tabs
Parameter
Options (default in
bold italics)
Description
preset
encoder
(any user-defined
profiles)
--- new preset ---
The configuration file selected for use.
encoder
: Factory default settings
Can also add more profiles by selecting
--- new preset ---
.
Save Button
Click to save preset value to the selected configuration.
Stop All Button
Stop all current encode channels. Encode must be stopped in
order for settings to be altered.
Start All Button
Start all encode channels.
System
Status
OK
10.10
ZFinder
Buttons
Description
Refresh
Rescans the network for Z3 Technology products
Edit
Device
Allows for manual edits to encoder settings:
Name
:
Name visible in ZFinder and top right corner of user interface (useful when multiple
units are on the same network)
IP Address
Subnet Mask
Gateway
