FV4K-1XA User Guide
DOC-USR-0268-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
84
Normally, this value should be set
to 1.25 * (video b audio
bitrate). This can be set to higher
values to allow leeway for times
when many bits are needed to
encode. This can be especially
useful for ensuring smooth playback
at lower bitrates.
TS Lowlat Mode
*
(UDP/TSRTP Only)
False
True
Selecting “True” causes the TS
muxer to instead send packets out
as soon as it receives them rather
than buffering them. This results in
lower latency at the expense of
decreased network efficiency and a
less smooth bitstream. There is a
limit of 5Mbps for TS Lowlat Mode.
Must be set to “False” for stream
to be compliant with ISO 13818-1
systems specification for transport
stream timing.
Authentication (RTMP/RTSP/RTMPS
Only)
Disable
Enable
If authentication is required for the
stream, select “Enable” to enter
user credentials.
User (RTMP/RTSP/RTMPS Only)
Enter a valid stream user name.
Password
(RTMP/RTSP/RTMPS Only)
Enter a valid stream password.
Text Overlay Enable
True
False
Enables display text over video.
Overlay Text
Z3Cam
Textbox for entering display text.
Overlay Location
Top Left
Top Center
Top Right
Bottom Left
Bottom Center
Bottom Right
Sets screen location of display text.
Overlay Text Size
16 px
32 px
64 px
Sets size of display text in pixels.
Channel Controls
Stop Button
Stop current encode session for
Channel 1. Encode must be stopped
in order for settings to be altered.
Start Button
Start encode session for Channel 1.
Delete Button
Removes channel instance for
encoding.
