FV4K-1XA User Guide
DOC-USR-0268-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
37
6.7
Setting NTP
The FV4K-1XA has support for NTP to set the time on the unit. If you require the system time to be set
do the following
(1) Load the web UI of the unit and switch to the System Setup tab. Click the go button next to Time
Settings.
(2) Select Network Time Protocol (NTP) from the Enable Time Service dropdown.
(3) Select the desired timezone for the unit form the Time Zone dropdown.
(4) Enter an NTP server address. The default is
(NIST).
(5) Click the change button. NTP is now enabled and your system clock will be adjusted.
Note:
The encoder will need to be on a network with a route to the specified NTP server and port 123 open on
the router. If the system time is not as expected check the network settings of the encoder.
Figure 31 Setting up NTP
6.8
Record to USB/Micro SD
The FV4K-1XA supports writing encoded video to a storage device connected to the USB port in .ts or
.mp4 file format.
Connect Storage
to USB 2.0 Port
