DOC-USR-0272-01
FSDI-1XA User’s Guide
51
(8)
A pop-up window appears with a reminder that changes to network settings require a reboot in order
to take effect. Click
OK
to reboot the unit. Wait 45-60 seconds for the unit to boot up.
(9)
You can return to the use of DHCP by checking
Use DHCP
in the System Setup tab and saving that to
the preset.
8.6.3
Open the User Interface Using ZFinder
(10)
Run the ZFinder PC Utility on your Windows PC. The ZFinder window appears. ZFinder does a scan of
the network and lists the location of all Z3 systems connected to the network. The FSDI-1XA appears
with your manually entered IP address.
(11)
Select the FSDI-1XA.
(12)
Click
Open Device
to reach the user interface.
8.6.4
Open the User Interface Manually
(13)
You can also access the user interface by manually typing your unit’s static IP address into a web
browser on any computer connected to the same network as the unit.
8.7
Upgrade Firmware
Firmware upgrades for the FSDI-1XA are available for download on your Z3 account.
(1)
In the System Setup Tab, click the
Update device firmware
button.
(3) Click “Save”
(1) Un-check “Use DHCP”
Figure 65 Saving Updated Network Settings
(2) Enter New IP Address
and desired network settings
