Z1 CPAP System, Руководство пользователя

Страница: 18 / 30

16
Occasionally, you may be asked to remove the Micro SD Card and send it to your clinician. The
card will contain information collected about treatment. Follow the instructions provided below
before you attempt to remove or replace the card.
To remove and replace the Micro SD Card:
1. Unplug power to the
Z1
.
2. To remove Micro SD Card, gently push the Micro SD Card in toward the
Z1
and
release. The Micro SD Card will “pop” out from the device. Grasp the Micro SD Card
gently and pull completely out of the
Z1
.
3. Plug in the
Z1 Power Supply
.
NOTE
: The
Z1
maintains at least 30 days of treatment history in memory
and will update the Micro SD Card when inserted.
User Software
See separate Z1 Software Guide for information on data viewing software. This guide may only be
available online.
Charging the Battery (PowerShell Only)
WARNING : Only charge the
Battery
with the supplied Human Design Medical
PowerShell
and the supplied Human Design
Medical
Power Supply.
Do not use any other
battery charger, AC adapter, or other device
to charge the
Battery
.
With both the
Z1
and the
Battery
fully inserted into the
PowerShell
, plug the
Power Supply
into the
PowerShell
as shown
and into a power outlet. (Figure 13)
CAUTION: Make sure your
Battery
is fully
charged before commencing CPAP therapy
using the
PowerShell
. The battery life of
a fully charged battery in the
PowerShell
is typically 8 hours or longer, after which
treatment will terminate. To recharge the
Battery
, see “Charging the Battery”.
Ensure the
Z1
is in standby mode (display reads 0.0). The
Battery
will not charge unless the
Z1
is in standby mode. The
Battery
status indicator on the
Z1
will flash when the
Battery
is charging.
The number of solid bars indicates the current level of charge.
(Figure 14)
Figure 14
Figure 13