Z1 CPAP System, Руководство пользователя

Страница: 14 / 30

12
Power Supply
WARNING: The
Z1
must only be used with
the Human Design Medical
Power Supply
(or the optional Human Design Medical
PowerShell
with Human Design Medical
Battery
). DO NOT use any other power source
with the
Z1
.
CAUTION: Make sure the AC power cord
IS NOT plugged into an AC power outlet
before continuing to the next step.
1. Plug the AC power cord into the AC Adapter.
2. Plug the AC power cord into a wall outlet.
3. Plug the AC Adapter into the
Z1
. (Figure 4)
4. The
Z1
will power up and cycle through a series of
startup displays.
5. After about 10 seconds, the
Z1
will enter standby mode.
The display will read 0.0. (Figure 5)
NOTE:
The
Z1
display will be active whenever
the device is receiving power.
PowerShell and Battery
(Available Separately or as Part of Z1 Unplugged)
WARNING: The
Z1
must only be used
with the optional Human Design Medical
PowerShell
with Human Design Medical
Battery
(or the Human Design Medical
Power
Supply
). DO NOT use any other power source
with the
Z1
.
1. Slide the
Battery
with the attached
Shuttle
into the lower
bay of the
PowerShell
until the
Shuttle
clicks into place.
(Figure 6)
NOTE
: The
Battery
can be removed from the
PowerShell
by pressing the two blue buttons
on the
Battery Shuttle
and sliding the
Battery
out.
2. Slide the
Z1
all the way into the upper bay of the
PowerShell
until you hear a “click” sound, indicating the
Z1
has locked into place. (Figure 7)
CAUTION: Insert the
Z1
carefully ensuring
the power barrel connector slides into the
power input on the
Z1
.
Figure 4
Figure 5
Figure 3
Figure 6
Figure 7