Z-Wave Z-Box, Руководство пользователя

Страница: 7 / 28

7
Power it up. After about 1 minute open a web browser and point to find.zwave.me
Below the login screen you will see the IP address of your Z-Box system. Click on the IP
address link to open the configuration dialog.
The Configuration Service
The configuration service is accessible with any web browser on Port 8084. Whenever you
want to change settings this service will be at your service and is available independent
of the Z-Wave engine.
Find your Z-Box ID and remember it for remote access to your system.
1. Choose a password that will be used to authenticate for the remote access in the
future. Whenever you access your Z-Box within your local network (as the first time) you
will not need a password.
The Configuration service uses the cloud infrastructure on find.zwave.me for the following
functions:

Find the IP Address of your Z-Box. You just used this function.

Remote Access when you are outside your home. For this a valid password is required –
see above.

Firmware Update: Just click on the firmware update tab and follow the instructions
 Remote Support: This function is usually disabled. You will need to enable it on request
if you desire remote service. Allowing service people to access your Z-Box is 100%
under your control.
Once you set your remote access password you are done with the initial configuration.