Z-Wave Z-Box, Руководство пользователя

Страница: 11 / 28

11
Control
The Control Tab allows operating the various types of devices and shows the reported values
in case of sensors or meters. In case the control options offered here are not sufficient please
refer to the Expert Command Tab as part of the Configuration menu for a full set of functions
supported by the device.
Switch
The switch dialog lists all devices of the network supporting switching, dimmer or motor
control capabilities. The device name and Id and the current status of the switch is given and
the time of the last status update. The “Update” button forces an immediate update of the
switch (if mains powered device). A ‘Switch All’ Icon shows whether or not the specific device will
react on a Switch All ON or Switch All Off command. A green triangle indicates that the device
will react to the command shown.
All actuators can be switched on or off. Dimmer and motors controls can be operated using a slider. For
dimmer there is a button “On” and “Full”. “Full” turns the dimmer always to 100 % diming value while
“On” will turn to the last dimming state before the dimmer was turned off. Clicking on the table heads
reorders the table view of the data.
Sensors
The sensor dialog lists all devices of the network providing sensor information. Device name
and id, the type of the sensor, the actual sensor value and the sensor scale is listed. The
Date/time column indicates when the given sensor value was received. Its possible to call for
a sensor update but bear in mind that battery operated device will only respond after the
next wakeup.