DCN: 140-01773-01
Page 5
Sets the minimum off time before another heating/cooling cycle can begin. Provides
compressor short cycle protection.
Temp Response
Range: 1-6
Default: 2
Adjust the temperature sensor sensitivity. Sets how fast the sensor responds to change.
Fan Cycler
The fan cycler function cycles the HVAC system fan for an ON period followed by an Off
period continuously. Used to provide minimum air ventilation requirements. When the Fan
ON time is set to a value greater than 0, an additional “Cycler” FAN mode is present when
pressing the FAN button.
Fan ON Time
Range: 0-120 minutes
Default: 0 (=OFF)
Fan OFF Time
Range: 10-120 minutes
Default: 10
Restore Defaults
Range: Yes, No
Default: No
Restores all settings to factory defaults.
Press Yes to restore defaults,
Press No to exit and not restore defaults
Relay Status
Display the status (on/off) of the thermostat output relays
