Z-Wave AC MASTER LITE, Руководство по установке

Страница: 12 / 27

1
0
Step Procedure / Description Status Indicator
1
Refer to your primary controller
user manual, enter to the browser
page that can input the Configuration
parameter.
2
Input parameter number
“27” and
parameter value (refer to brand and
code list in hardcopy or download
softcopy from our website). Then
complete the Configuration process.
Green Indicator wi ll
turn on. If fail, Red
Indi- cator will flash
TWICE.
3
Go back to the control page of AC
Master on the
gateway’s Browser
and try the function such as (Cool,
Temperature Set). If the Air
Conditioner does not respond to the
command you set on the Gate- way
(Cool, Heat, Auto, Temperature Set,
etc….), repeat Step 2 and 3 to Select
the next IR Code on the search list.
Green Indicator
flashes ONCE
every time i f
receives a
command from
Gateway
Important Information
• Different brand or model of air conditioner has different function. For
exam- ple, some air conditioner only support temperature set from
18°C - 30°C, if user set 17°C on gateway, AC Master will not respond.
• There are more than 1 code for each brand, some does not support
Heat, if User selected a code that does not support Heat but Original
air conditioner supports Heat Function, please continue to try next
code until the correct one is selected.
• You can record down your Device Code for future reference after
setting up the AC Master correctly.
• It is not allowed to set up the IR Code when the Battery Level equal or
below to 50%
AC Device programmed to your AC Master
Code Number :