!
4
function better to user needs or unlock further enhanced
features.
Pair Mode for Button 1 and 3 (# 1)
Pair Mode for Button 2 and 4 (#2)
Value Description
0
Separately
1
In pair without double clicks (Default)
2
In pair with double clicks
Control Commands on Group 1 (# 11)
Control Commands on Group 2 (# 12)
Control Commands on Group 3 (# 13)
Control Commands on Group 4 (# 14)
Value Description
0
Disabled
1
Switch On/Off and Dim (Basic and Multilevel) (Default)
2
Switch On/Off only (send Basic Set)
3
Switch All
4
Send Scenes
5
Send Preconfigured Scenes
6
Control devices in proximity
Typical click timeout (# 20)
Typical time to differentiate click, hold and double click
Value
Description
1 — 100 in 10ms units (Default 50)
Send the following Switch All commands (# 21)
Value Description
1
Switch off only (Default)
2
Switch on only
255
Switch all on and off
Invert buttons (# 22)
Value Description
0
No (Default)
1
Yes
LED confirmation mode (# 24)
This allows saving battery power
Value Description
0
No confirmations
1
Confirm button press
2
Confirm button press and delivery (Default)
Suppress Device Wakeup (# 25)
If no device is in range when wakeup several unsuccessful
communication attempts will drain battery.
Value Description
0
Suppress (Default)
1
Allows Wakeup
Unsolicited Battery Report on Wake Up (# 30)
Value Description
0
No (Default)
1
To same node as wake up notification
2
Broadcast to neighbors
Technical Data
Battery Type
1 * CR2032 (only use battery of correct type,
don’t dispose in normal trash bin but recycle)
Frequency
EU: 868.4 MHz (EN 300 220) or
IN: 865.2 MHz (CSR 564) or
RU: 869.0 MHz (GKRCh/EN 300 200) or
US: 908.4 MHz (FCC CFR47 P 15.249)
Wireless Range
Up to 100 m outside, on average up to 20 m
inside buildings
Explorer Frame
Support
Yes (SDK 4.55)
Specific Device Class
Multilevel Remote Switch
Routing
No (FLIRS)
Firmware Version
1.3
Dimensions
50 x 30 x 10 mm
Weight
30 gr.
FCC - ID
2AAYU-KFOBUS
Z-Wave.Me guarantees that every device is free from physical
defects in material and workmanship under normal use for one
year from the date of purchase. If the product proves defective
during this one-year warranty period, Z-Wave.Me will replace it
free of charge. Z-Wave.Me does not issue any refunds. This
warranty is extended to the original end user purchase only and
is not transferable. This warranty does not apply to: (1) damage
to units caused by accident, dropping or abuse in handling, or
any negligent use; (2) units which have been subject to
unauthorized repair, taken apart, or otherwise modified; (3)
units not used in accordance with instruction; (4) damages
exceeding the cost of the product; (5) transit damage, initial
installation costs, removal cost, or reinstallation cost. For
information on additional devices, please visit us online.
CE for Class B ITE (Following European standard
EN55022/1998; EN61000- 3-2/1995; EN61000-3-
3/1995,
EN55024/1998,
EN60950-1/2
