manualshive.com logo in svg

Z-Tec ZT4611, Руководство пользователя

Поделиться
Скачать
Z-Tec ZT4611 Скачать руководство пользователя страница 6

6  

 

0004-000067 

 

Introduction  
 
 

This manual provides detailed information on the ZTEC

®

 EPICS interface and 

functionality. Printed LXI Quick Start and EPICS Getting Started guides, included with an 
instrument, may provide enough information to get an instrument up and running quickly.  
Reference this manual or visit 

http://www.ztecinstruments.com/support

 for additional 

technical support. 

 

Instrument Discovery 

Interfacing to an EPICS ZTEC

®

 M-Class Scope involves LAN discovery to identify the IP 

address of the desired instrument.  The IP address is necessary to access network and 
EPICS configuration settings. The IP address can be configured or identified in one of 
the following ways: 
 

1.  With a DHCP server, the instrument will be dynamically assigned an IP address. 
2.  Without a DHCP server, the instrument will use auto-IP procedures to find a non-

allocated IP address. 

3.  To determine the instrument’s IP address, consult the network manager or use 

any LXI compatible discovery tool, such as the provided ZFind™ Utility.  A 
monitor, connected to the instrument’s rear VGA port during startup, will also 
display the IP address during boot. 

4.  After discovery, the ZTEC

®

 

webLXI

 interface enables the network addresses to 

be altered, made static, and/or given an alias. 

 
 

Versions 

The ZTEC

®

 EPICS interface was developed using EPICS version 3.14.9 and Channel 

Access Client version 4.11. 
 
 

Instrument Information 

For more information on the instrument such as descriptions of functionality, 
specifications, and default states please refer to the M-Class Digital Storage 
Oscilloscope Instrument Manual. 
 
 

EPICS Information 

Visit the Experimental Physics Industrial Control System (EPICS) Home page at 

http://www.aps.anl.gov/epics/

 for information, detailed documentation and tutorials and 

other downloads for the EPICS and Channel Access systems. 
 

Содержание ZT4611




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды