Chapter 2 Hardware Installation Page 24
Figure 16 Connect Up – Step 4
Grounding
The R2 Extender is shipped with a grounding wire. The unit must be properly grounded to protect
against power surges. The R2 Extender grounding point can be found on the bottom of the unit. It is
supplied with an appropriate grounding lug for attachment to the ODU.
Figure 17 Grounding
Power On
To power up the R2 Extender, follow the steps bellow:
1. Plug a user-supplied Cat-5 Ethernet cable from your wired LAN (or a computer) into the power
injector RJ-45 jack (
DATA IN
);
2. Plug a user-supplied Cat-5 Ethernet cable from the R2 Extender into the power injector RJ-45 jack
(
P+DATA OUT
);
3. Connect the power module to the power injector and plug the AC cord into an AC power
