Z-Com R2 Extender, Руководство пользователя

Страница: 18 / 73

Chapter 2 Hardware Installation Page 18
Hardware Installation
Assemble the Mounting Bracket
1. Place the main bracket into the seating and use a spanner to fasten the bracket to the R2
Extender with M5×16 screws ⑧ and M5 washers ⑨ provided in the hardware packets;
Figure 4 Bracket Mounting – Step 1
2. Assemble the main bracket by placing articulation pole
②
to the T-form bracket
①
via a
M8×90
④
screw through the insertion axe and fix with the M8 washer
⑤
, spring washer
⑥
and M8 nut
⑦
;
Figure 5 Bracket Mounting – Step 2
Pole Mounting
1. Install the main bracket and the pole mount bar
③
over the top of the pole by securing the
drill holes of the pole mount bar to the main bracket ones and insert two M8×80
④
screws,
spring washers
⑥
and washers
⑤
through the drill holes and main bracket;