152
153
Electromagnetic compatibility information
Electromagnetic compatibility information
For all ME EQUIPMENT and ME SYSTEMS
Table 2
Guidance and manufacture s declaration-electromagnetic emission
'
The
is
intended
for
use
in
the
electromagnetic
environment
specified
below
.
The
customer
or
the
user
of
the
YE660D
should
assure
that
it
is used
in
such
and
environment
.
YE660D
Immunity
test
IEC 60601
test level
Compliance
level
Electrostatic
discharge
(ESD) IEC
61000-4-2
Electrical
fasttransient
/burst IEC
61000-4-4
±2 kV
100kHz repetition
frequency
Surge IEC
61000-4-5
±1 kV line(s)to line(s)
±2 kV line(s)to earth
±8 kV contact
±15 kV air
<5 % UT (>95 % dip in UT)
for 0.5 cycle
40 % UT (60 % dip in UT)
for 5 cycles
70 % UT (30 % dip in UT)
for 25 cycles
<5 % UT (>95 % dip in UT)
for 5 s
Voltage dips,
short
interruptions
and voltage
variations on
power supply
input l ines IEC
61000-4-11
NOTE: UT is the a.c. mains voltage prior to application of the test level.
30A/m
50Hz or 60Hz
Power
frequency
(50/60 Hz)
magnetic
field IEC
61000-4-8
±8 kV contact
±15 kV air
±2 kV
100kHz repetition
frequency
±1 kV line(s)to line(s)
<5 % UT (>95 % dip in UT)
for 0.5 cycle
40 % UT (60 % dip in UT)
for 5 cycles
70 % UT (30 % dip in UT)
for 25 cycles
<5 % UT (>95 % dip in UT)
for 5 s
30A/m
50Hz or 60Hz
For
all
ME
EQUIPMENT
and
ME
SYSTEMS
Table 1
Guidance and manufacture s declaration- electromagnetic emission
'
The
YE660D
is
intended
for
use
in
the
electromagnetic
environment
specified
below
.
The
customer
or
the
user
of
the YE660D
should
assure
that
it
is used
in
such
and
environment
.
Emission test
Compliance
Group 1
RF emissions
CISPR 11
Class B
RF
emissions
CISPR
11
Class A
Complies
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
There is the potentia risk of radio frequency
interference between the device and other
devices. If there is, please find out the problems
and take the following measures:
(1) Turn off the device, and turn on again.
(2) Change the direction of the device.
(3)Keep the product away from the interferential
devices.
Group1