Take the electric wheelchair out of the box. Lift up the folded backrest,
press down on the seat back tubes at both sides, open the electric
wheelchair until the seat cushion and back cushion are fully
expanded. Refer to Figure 3, Figure 4, Figure 5 and Figure 6.
5. Unpacking and Installation
Use of the backrest folding mechanism:
hold the handle with both hands, lift up the
backrest tube in a clockwise direction until
the eject pin of the backrest folding device
snaps into the eject pin hole, see Figure 7;
pack up: press the buckle of the backrest
folding device with your fingers, hold the
backrest folding device with both hands.
Fold it up in a counterclockwise direction
after confirming that the eject pin has left
the eject pin hole, see Figure 8.
To avoid
pinching, do
not hold the
seat tubes
with your
hands when
pressing
down the seat
cushion.
Figure 3
Figure
Figure 5
Figure 6
Figure 7
06
07
Up
Note! Check the document attached to the electric
wheelchair
Type B application part
Meaning
Symbols
Fragile
Rain-proof
Splash-proof: a water splash in any direction will
not cause any harmful effect
IPX4
This sign indicates the mandatory contents (must
be observed). The specific mandatory contents are
expressed in words or drawings in or near. The left
figure indicates the "general mandatory contents"
This sign indicates the prohibited contents (not
allowed). The specific prohibited contents are
expressed in words or drawings in or near. The left
figure indicates the "general prohibited contents"
Note
