manualshive.com logo in svg

YUSHI YUT-2800, Руководство пользователя

Поделиться
Скачать
YUSHI YUT-2800 Скачать руководство пользователя страница 25

YUSHI INSTRUMENTS

 

 

 

22 

3.8.2 Freezing 

The function can freeze and lock the display on the current screen. In the freezing mode, you can 

move the gate to measure the echoed signal frozen on the screen. 

If you want to freeze the current display, press              .    If you want to return the normal mode, 

press          a    gain to unfreeze. 

Note: in the freezing mode, all the adjustable parameters (gain, sound velocity) can not be adjusted. 

3.8.3Wave Peak Memory   

Wave  peak  memory  is a  function  that  the  instrument  compares  the  “new”  with  the  “old”  highest 

dynamic echoes automatically and preserves the highest still echo. 

First use the gate to  lock the echo needed,  press            to activate the wave peak memory status. 

When  you  move  the  probe,  if  there  emerges  a  dynamic  echo  which  is  higher  than  the  previous  static 

wave  displayed,  the  instrument  can  catch  the  new  echo  as  the  current  highest  echo  displayed.  Press                                                   

again to exit the wave peak memory.     

3.8.4 Full Screen 

Press              to enlarge the waveform display area to full screen so that you can observe the echo 

and  the  measurement  values  conveniently.  At  this  moment,  the  main  menu  display  is  canceled.  If  you 

want to return to the normal display mode, press                again.     

Note: in full screen mode, except the functions of automatic gain, wave peak memory, and freezing 

are available, other functions will be locked and unavailable. 

Chapter 4 Application of Testing 

4.1 Calibration Method and Steps of the Instrument 

Before  you  use  YUT-2600  to  test  the  work  piece,  you  should  first  calibrate  the  instrument: 

according to the material, size of the work piece to be tested as well as the relevant standards, choose the 

Содержание YUT-2800















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды