YUSHI INSTRUMENTS
20
3.7.1 Memory Number
Select the memory menu, press (up) or (down) to select the memory number
submenu. Then press (left) or (right) to adjust the values.
Note: the memory number can be chosen recurrently in the data set ranging from 1 to 1000. When
setting the memory, if there is a before the data set memory number, that means the data set is
occupied. If you save the data, the original data will be covered. When you adjust the memory number,
you can press Ok to set the steps, which are divided into 1, 10, and 100.
3.7.2 Call-out
After the data set is called out, the instrument parameters will be set same as those which are stored,
and they will be displayed in freeze mode of the waveform stored.
First, set the memory number as the one you need, then select the option of call-out, press
(left) or (right). When it comes to confirm calling out the file on the screen, press Ok to
confirm and press any other key to cancel.
3.7.3 Storage
You can store the current parameter setting of the instrument, DAC curve and the waveforms into
the data set of an appointed memory number.
First, set the memory number as the number you want, then select the option of storage, press
(left) or (right). When it comes to confirm storing the file on the screen, press Ok to confirm and
press any other key to cancel.
Note: if there is a before the memory number, that means the data set is occupied. The storage
will cover the stored data at this moment.
3.7.4 Deletion
First set the memory number, then select this option, press Ok to confirm, any other key to cancel.
If there is a before the memory number, that means the data set is occupied. You can delete the
set.
