YUNEEC TYPHOON H3, Руководство пользователя

Страница: 12 / 49

Angle Mode
If the Flight Mode selection switch is in the center position, then the aircraft is in Angle Mode. In this
mode the aircraft moves in line with the joystick, in the direction in which the nose is pointed. So, if
you move the right stick to the left, the TYPHOON H3 will tilt to the left and thus move to the left. That
is assuming that the nose is pointing away from you. If the nose is pointing towards you, the aircraft
will move to the right from your point of view.
NOTICE: TYPHOON H3 will hold its position automatically when GPS is on (if there is sufficient GPS
signal) and it will retain the altitude level if the left stick is in the middle position.
Exp curve function in Angle mode
This function is used to adjust the Operational Curve
of joystick function (throttle, aileron, elevator and
rudder) in Angle flight mode, so as to achieve the
most user-friendly airplane control feel.
1.Click the settings button[ ]at the top right to find
"Flight Control Settings" in the aircraft options and
open this menu.
Option 2
Press the icon ( ), then slide the sliding block, and the aircraft will
take off. Then the icon ( ) will turn Point-to-Land icon ( ).
Retracting the Landing Gear
Raise the landing gear control using the landing gear control switch
on the ST16S.
Flight Modes
Take Off
TS01
TS02
TS03
TS04
D/R 0˚
Channel Setting Model Select
Pitch 0˚
300M
125km/h
TS05
TS06
TS07
TS08
SPORT MODE
ANGLE MODE
RTL MODE
12
Flight Manual Mode
Compass Calibration
Flight Control Settings
Cruise Speed 7m/s
>
>
Other Settings
10m/s 2m/s