Revised 26/05/10
ALLURE ELECTRONIC Install Ops May2010
Page 2 of 23
Designed and built by:
YUNCA GAS
2 Donald Street, Kaikorai Valley, Dunedin 9011.
PO Box 500, Dunedin 9054.
Phone 03 488 4342
Fax 03 488 1017
Web
www.yunca.co.nz
CONTENTS
PAGE
INTRODUCTION
2
CAUTIONS and MAINTENANCE
3
INSTALLATION and SERVICE
DIMENSIONS and CLEARANCES
4
FRAMING and CLADDING
5
FLUE INSTALLATION
6 – 7
PLACING of Unit
8
CONNECTION TO GAS SUPPLY & TESTING PRESSURES
9 – 11
REMOVING PANELS and PARTS for SERVICE
12 - 13
COAL AND LOG LAYOUT
14 - 15
OPERATION and COMMISSIONING
16
MAINTENANCE
17
Appendix A
FAULT FINDING GUIDE & WIRING DIAGRAM
17 - 19
Appendix B
SPARE PARTS LIST
20 - 21
Appendix C
WARRANTY
22
Appendix D
WARRANTY REGISTRATION
23
INTRODUCTION
Welcome and congratulations on purchasing your YUNCA ALLURE INDOOR ELECTRONIC
CONTROL flued gas open fire. Please read these
Operating Instructions
carefully before
attempting to operate the heater, and ensure all members of your home understand how this
elegant heater functions. If you have any questions please contact your Yunca dealer.
These instructions cover only the INDOOR ELECTRONIC CONTROL models.
Please fill out the warranty on the last page, and return the registration form promptly.
The
YUNCA ALLURE INDOOR ELECTRONIC CONTROL
FLUED GAS FIRE is a gas-fired, conventionally
vented, room heater that has Infra-red remote (electronic) start up and operation, requiring 240V power
supply to operate. It is manufactured to New Zealand standards.
