Dome Camera Bracket Installation
Fig 1.3
Fig 1.4
Fig 1.5
Step1-
Use the diagram shown below to measure out the distances between the four holes required, then drill 4
holes in the chosen mounting location.
Step 2-
Feed the dome connection cable into the bracket hollow pipe. Caution! Before attaching to the wall, check
that there is nothing left inside the bracket aperture. As shown in Fig 1.4.
Step 3
- Fix the bracket and connection cable to the wall using the fixing screws supplied. As shown in Fig 1.5.
Step 4
- Connect the dome connection cable to connector located in the aperture at the top of the dome housing,
as shown in Fig 1.6.
Fig 1.6
Connect the dome cable
connectors
7
