1.7 Set the Guard Tour (NO.+TOUR+ON)
In the standby mode, press numeric key to enter the guard tour number to be edited (as shown below);
Press the TOUR and ON keys in order, and press the DOWN key to enter the parameter setting of the first
tour point, or the UP key to enter the parameter setting of the 16th tour point. After pressing the DOWN key,
the users could set the preset-point number to be toured (as shown below).
When the input is completed, press DOWN key to enter the speed setting of this tour with 9 levels of speed
selectable (as shown below).
When the setup is completed, press DOWN key to enter the retention time setting of this tour point (as
show below), or UP key to set the previous parameter.
Press the DOWN key to enter the parameter setting of the next tour point and the UP key to set the
previous one. When all settings are completed, press ON key to save and send and return to the standby
page.
1.8 Call the tour track(TOUR+NO.+ON)
In the standby mode, press TOUR key (the page as shown below),
Enter the number of tour track to be run, then press ON key to execute this operation and return to the
standby mode, or CLEAR key directly return to the standby mode.
18
