YUKEN KOGYO ELDFG-01EH 10 Series, Инструкция по эксплуатации, Страница: 7 / 21

EM-1359
- 6 -
2. About the product
2.1 Model number designation
*1. The spool in the neutral position is shown.
*2. Phosphate ester type fluids are also supported. When phosphate ester type fluids are used, prefix “F-” to the model
number because the special seals (fluororubber) are required to be used.
2.2 Specifications
ELDFG-01EH ELDFG-03EH
Model Number
-10-3C* -20-3C* -35-3C* -40-3C* -80-3C*
Max. Operating Pressure MPa 35
Max. Tank Line Back Pressure MPa
21
Rated Flow
@
∆
P = 1 MPa (4-Way Valve)*
1
L/min
10 20 35 40 80
Hysteresis 0.1% or less
Repeatability
0.1% or less
(0 ↔ 100 ％ V) ms
Step Response
(Typical Rating)*
2
(100 ↔ 0 ％ V) ms
16 23
(Phase: -90°) Hz
Frequency Response
(±25
％ Amplitude)
(Typical Rating)
*2
(Gain: -3 dB) Hz
80 50
Vibration Proof G 10
Protection IP65
Ambient Temperature ºC
-15 - +60
Spool Stroke to Stops mm
±2.5
±3
Coil Resistance [20 ºC] Ω
3 2
Current Consumption A
2 (Impulse Load: 3 A)
Approx. Mass kg 3.3
7.3
Electric Connection 6 + PE Connector
*1. Use the valves so that the relationship between the valve pressure difference and the flow rate, as specified in “Range
of flow control” on page 7, is met.
*2. This value is measured for each valve at a supply pressure of 14 MPa; it may differ depending on the actual circuit and
operating conditions.
ELDF G - 01 EH - 35 - 3C2P - XY - C T 10
Series
Number
Type of
Mounting
Valve
Size
Amplifier
Type
Rated Flow
L/min
( ∆ P= 1 MPa)
Spool Type *
1
Direction
of Flow
Fail-Safe
Function
Input Signal/Spool
Travel Monitoring
Design
Number
01
10 : 10 L/min
20 : 20 L/min
35 : 35 L/min
ELDFG:
Direct
Operated
and High
Response
Type
Proportional
Electro-
Hydraulic
Directional
and Flow
Control
Valves
G:
Sub-plate
Mounting
03
EH:
OBE
Type
40 : 40 L/min
80 : 80 L/min
3C2 : 10% Overlap
3C40 :
A, B, T Connection
3C2L : 2% Overlap
(Linear Flow Gain)
XY :
Meter-In
/Meter-
Out
C : Neutral
A :
P → A, B → T
Position
B :
P → B, A → T
Position
D :
Voltage Signal ± 10 V
(P → A → B → T Flow with
Positive Input)
E :
Current Signal 4 - 20 mA
(P
→ A → B → T Flow with
12 - 20 mA Input)
F :
Current Signal ± 10 mA
(P
→ A → B → T Flow with
Positive Input)
10