EM-1359
- 3 -
Always follow the safety precautions.
Wiring location
Never use the product in an explosive
atmosphere where flammable gases or
explosives are handled. Doing so may
result in a fatal accident, such as fire or
explosion.
Foreign matter in hydraulic fluid may result
in malfunction of the product. Keep
hydraulic fluid clean (NAS 1638 class 10 or
better).
When handling the valve, pay attention not
to apply tension to the cable. Doing so
may cause malfunction due to cable
breakage.
The connector is not included with the valve.
Wire the valve correctly by using the
specified standard connector and referring
to the instructions for the connector. For
the use of YUKEN’s connector TK290457-1,
see the ”Wiring” section of this manual.
Never touch the connector while the power
is on. Doing so may cause electric shock,
resulting in a fatal accident.
Do not modify the product. Doing so may
prevent the product from achieving the
design performance and impair safe
operation.
Do not step on or put any heavy object on
the product. Doing so may result in
damage to the product/equipment or injury
from collapse/falling.
Valve characteristics may vary depending
on the load pressure and fluid temperature.
Make adjustments so that the valve can
accelerate, decelerate, and stop safely
across the entire range of operating
pressures and fluid temperatures.
Make sure of correct wiring!
Do not apply load to the cable.
DANGER
WARNING
CAUTION
Cable