YUKEN KOGYO ELDFG-01EH 10 Series Скачать руководство пользователя страница 3

EM-1359 

- 2 - 

 Safety Precautions 

 

 

 

This manual is intended for users of the product with basic knowledge of hydraulics (who 

are at least equivalent to a class-2 hydraulic system control engineer or who have 

received technical training from YUKEN KOGYO). 

 

The product should be handled by users with knowledge equivalent to that stated above 

or under the supervision of such personnel. 

 

Be sure to provide end-users with the instructions, warnings, and cautions described in 

this manual. 

 

Be sure to attach this manual when transferring or reselling the product. 

 

 

Safety precautions in this manual are classified into three levels: “DANGER”, “WARNING”, and 
“CAUTION”.  Be sure to read and understand the safety precautions before reading the main 
body of this manual. 

 

Symbols and definitions for safety precautions in this manual are as follows. 

 

Symbols and definitions for safety precautions in this manual are as follows. 

 

 

 
 
 

 
 
 
 

Ignoring safety precautions labeled “CAUTION” may result in serious consequences depending 
on the situation.  Regardless of their classification, all safety precautions contain important 
instructions.    Be sure to follow them. 

 

YUKEN KOGYO CO., LTD. assumes no liability for any accident or damage arising from the use 
or operation of the product in a manner other than specified in this manual. 

 

Indicates an imminent danger that is very likely to cause death or 
severe injury if the instructions are ignored. 

Indicates a potential danger that may cause death or severe injury if 
the instructions are ignored. 

Indicates a potential danger that may cause injury or property 
damage if the instructions are ignored. 

DANGER 

WARNING 

CAUTION 

Содержание ELDFG-01EH 10 Series






















Отзывы: