Yudor YSS-1523A-OIP, Руководство пользователя

Страница: 20 / 34

20
6.1 Select Camera - By Input camera ID
6.1.1 Press CAM then CALL ID
<
001-255>: - - - show on the screen.
6.1.2 Input CAMERA ID (Three digits) then you can set function or control
camera.
Example:
To select ID 1 camera: CAM
→
0
→
0
→
1
,
the operation must be completed
within 5 seconds, or the Camera ID Selection mode would be cancelled
automatically.
When selecting a correct Camera ID, the Camera ID will
appear on the screen; otherwise no display would appear on the screen.
※
If you do not know the Camera ID, Press
LK
to check the Camera ID.
6.2 Remote control
After you select the camera you want by input camera ID, then you may press the
direction key or the lens control key to control it. Press it down for operation and
release it to stop. When you operate, a status code will appear below the screen,
such as: Direction key Up
½
, Down
¾
, Left
»
, right
¼
, Tilt left up
»½
, Tilt right
up ¼½ , Tilt left down »¾ , tilt right down ¼¾ , ZOOM ST
z
/
Z,
FOCUS ST
f
/
F
IRIS
ST
adjust IRIS from MIN ~ MAX
。
※
The rotation speed will change according to the zoom lens in or out.(5~60
ﾟ
/sec).
For speed setting, please refer to MENU SPEED-SET menu setting.
※
When
½ ¾ » ¼
twinkles means this direction is already to the end.
6.3 Alarms and Output On/Off
6.3.1 Press EX screen shows SET EX<1 - 5> -
6.3.2 Press 1~4 to choose alarm 1~4 on or off.
Example:
Alarm input 1: EX
→
1
→
ON / EX
→
1
→
OFF
6.3.3 Press 5 to choose output ON or OFF
Example:
Output ON: EX
→
5
→
ON / Output OFF: EX
→
5
→
OFF
※
When alarm input 1 triggered, the camera will corresponding goes to preset
position1For alarm mode setting, please refer to MENU ALARM-SET .
※
Output switch can control small electric facility Max Load 300mA.
※
Functional only when alarm-set
：
MODE is OFF
6-Infrared Remote Control mode
49
30. Network IP Assignment
30.1 Use the software, “IP Installer” to assign the IP address. The software is in the
attached software CD.
30.2 There are two languages for the IP installer
30.21 IPInstallerCht.exe: Chinese version
30.22 IPInstallerEng.exe: English version
There are 3 kinds of IP configuration.
Static IP (Public IP or Virtual IP)
DHCP (Dynamic IP)
PPPoE (Dial-up)
30.3 Execute IP Installer
30.31 For Windows XP SP2 user, it may popup the following message box. Please click
“Unblock”.