Yudor YSS-1523A-OIP, Руководство пользователя

Страница: 16 / 34

16
001 SYSTEM SETUP
GROUP
ALARM
MASK
→ NO .1
TRACKING
PROTOCOL DANA9600
ID
MISC
CAMERA
001 SYSTEM SETUP
MASK NO .1
RELOAD
→
ENT.
CLEAR ENT.
SAVE ENT.
DELAY
：
Delay time setup, after finish delay time count down , camera will back to
original status before alarm triggered.
BY SAT
Delay time will automatically go with
5.4.4 TRACKING
delay time
setup
。
(Can be set only when ALARM MODE set on SAT)
005
Delay time can be set from 005 ~ 255
秒。
(
Can be set only when
ALARM MODE set on “ON” or ”OFF”
)
OUTPUT
：
switch of small electric facility (Max load 300mA),
ON
OFF
( Only when MODE is setup to OFF, OUTPUT will show on the OSD MENU)
※
Output switch goes off by press LK key during delay time count down.
Auto tracking functions keep working.
※
Press LK key to know the current status of alarm.
Twinkling ” AL001”: ALARM1 keeping triggered.
” AL001”: ALARM1was triggered, but already goes off.
: No alarm been triggered.
5.4.3 MASK
Only M / T-Series provide Function
Only 4 blocks of privacy masking can be set in a
single frame of monitor.
Maximum 24 blocks of privacy masking can be set
。
Choose one block from No.
1 ~ No. 24
，
Press END to enter.
5.4.3.1
RELOAD, CLEAR, SETUP BLOCK OF MASKING
RELOAD
Load masking or reload previous setup
。
CLEAR
Clear block of masking
SAVE
Setup position and size of masking
53
31. Live Video
Start a IE browser, type the IP address of the IP camera in the address field. It will show
the following dialogue box. Type the user name and password.
The default user
name and password are “
admin
” and “
admin
”.
31.1 The following GUI shows.