Yudor YSS-1523A-OIP, Руководство пользователя

Страница: 21 / 34

48
29.4 PRIORITY
Selecting IR SW INT Detecting Signal
Move cursor to PRIORITY, press ENTER key to enter
PRIORITY menu.
Press UP or DOWN key to select AGC/SENSE UP.
MISC MENU
29.5 MASK A / B
MASKING AREA SETTING
Move cursor to MASK A/B, press ENTER key to enter
MASK A/B menu.
Press UP or DOWN key to select ON/OFF.
Then press ENTER key to enter MASK A/B SETTING
menu.
MISC MENU
Move cursor to H-POSITION, V-POSITION, H-SIZE or
V-SIZE press ENTER key to enter NUMBER SETTING
menu.
Press UP or DOWN key to adjust number (Adjusting
H-POSITION, V-POSITION, H-SIZE or V-SIZE).
CONNECTED set OFF, MASK will be fixed.
CONNECTED set ON, MASK will be connected with
zoom.
MASK A / B SETING MENU
MISC
H-REVERS OFF
V-REVERS OFF
POSI/NEGA POSI
PRIORITY
→
AGC
MASK A OFF
MASK B OFF
MISC
H-REVERS OFF
V-REVERS OFF
POSI/NEGA POSI
PRIORITY AGC
MASK A
→
ON.
MASK B OFF
MASK A / B
H-POSITION → 032
V-POSITION 064
H-SIZE 048
V-SIZE 032
CONNECTED OFF
21
6.4 Preset positions Call, Save and Clear
6.4.1
Call
Press PRE once then input camera ID CALL PRESET: - -
PRE
→
0
→
2 call preset 02
6.4.2
Save
Press PRE twice then input camera ID CALL PRESET: - -
PRE → PRE
→
1
→
0 save preset 010
6.4.3
Clear
Press PRE three times then input camera ID CALL PRESET: - -
PRE
→
PRE
→
PRE
→
0
→
6 clear preset 06
※
Preset position input limit from 01 to 62.
6.5 Call Next Preset Position
By press and release FUN key you may recall preset position 01 and see CALL
PRESET
:
01 OK on the screen. And by repeating this method you may check all
preset positions. When execute FUN, the auto pan and group auto cruise will stop.
6.6 Execute Auto Pan Mode, Group Auto Cruise Mode,
(Recorded) Cruise Mode and Auto Tracking Mode
Press AUTO screen shows CALL GROUP <0 - 7>
:
-
AUTO
→
0
：
Auto Pan (Refer5.4.1.1 Auto Pan SET to set auto pan limit.)
AUTO
→
1
：
cruise preset 001 ~ 032 (01 ~ 16 M / T-Series)
AUTO
→
2
：
cruise preset 033 ~ 064 (17 ~ 32 M / T-Series)
AUTO
→
3
：
cruise preset 065 ~ 096 (33 ~ 48 M / T-Series)
AUTO
→
4
：
cruise preset 096 ~ 128 (49 ~ 62 M / T-Series)
AUTO
→
5
：
cruise preset 001 ~ 128 (01 ~ 62 M / T-Series)
AUTO
→
6
：
Recorded cruise
AUTO
→
7
：
Auto Tracking Mode (Only M / T-Series provide Function)
※
To execute group auto cruise, at least 2 positions shall be preset in each group.
※
Press any direction key to stop
AUTO
mode. When camera regains power after lost it,
need 20 sec to restart and back to previous status.
6.7 Speed activate Auto Tracking Function
Adjust camera (Direction and zoom) to the spot to start auto tracking,
Press
AUTO
→
7 to activate Auto Tracking.
(Setup please refer to
5.4.4 TRACKING)