TEMPERATURE CONTROLLER
4
USER
’
S MANUAL
5
1) Check the wiring status of the connector attached to the mold and the type of T/C.
2) Check if the power lines are separated from the T/C lines, and they are arranged in order.
3) Check if the trunk specification fits to the Controller.
4) Check connection and wiring state of the trunk.
5) Check resistance and insulation state of the heater, then check if T/C wire is disconnected.
6) After the mold is fixed at the injection machine, connect the trunk.
7) Check if the Power Switches of the Main & Units are off.
8) If Input Voltage (240V/380V) fits to the controller voltage specification, connect Power
Cable. (Input power voltage is noted on the label of the controller case. If the power
input voltage does not fit to that written on the label, ask a territory office and correct the
controller wiring. False wiring can cause malfunction of the controller and damage on
the unit).
9) Make it sure to earth ground wire of the controller. (Neglect to earth the ground wire
(green line) can cause damage to fuse and Triac due to noise voltage)
10) Turn on the Main Power Switch first.
11) Then, turn on the Unit Power switch.
12) Set to the appropriate temperature.
13) Check if the desired temperature is reached and stabilized.
The controller is a device that has a function to maintain the desired
temperature consistently by sensing the state of Hot Runner System by use
of high-intellectual computer system named MICOM and input proper power.
It has several important functions for precise temperature control.
is a method in order to maintain temperature at the set temperature
accurately by controlling Output Power reflecting proportion, integration, and
differentiation values.
Installation Condition : The bottom side is blocked for the safety.
1) PID Control
1. Items to check before using the Controller &Operation Procedure
2. Basic Structure of Controller
3. Outline of Controller
CAUTION : To prevent possible malfunction of the temperature
control modules, the cooling fan MUST OPERATE AT ALL TIMES.
