![background image](http://html1.mh-extra.com/html/yuchai/yc20sr/yc20sr_operation-manual_3666187085.webp)
76
4.17.
Storage of the machine
4.17.1.
Preparation before storage
When storing the machine for a long time, do the following steps.
1)
Clean and rinse the machine before put it indoor. If you have to store the
machine outdoor, choose a flat surface and cover the machine with tarp.
2)
Apply a thin layer of grease to the metal surface of the piston rod. Lubricate all
lubrication points.
3)
Remove the battery, charge it, and store it in a dry place where it will not freeze.
4)
Drain the engine oil in a hot state and fill it with anti-corrosion oil. The anti-
corrosion oil used is MIL-L-21260 for piston engines. Winter storage need 1 or 2
SAE10W oil, summer storage need SAE30 grade oil.
5)
Add 4-6% of the same type of anti-corrosion oil to the fuel and mix the two well
together. To prevent condensation, refill the tank with this fuel mixture.
6)
Check the anti-freeze performance of the coolant and make it at least -20°Co by
adding antifreeze. If the coolant does not contain anti-corrosion agent due to the
climate, add anti-corrosion agent (e.g. 5% anti-corrosion agent according to
MIL-G4339C).
7)
Start the engine and run for more than 15 minutes with different speed but no
load. (When draining the hydraulic parts and reducer , the operator should also
run with no load and then replace oil before storage.)
8)
Close the inlet of the air filter and the outlet of the exhaust pipe. It is
recommended to use thick plastic paper and adhesive tape.
9)
Lock the platform, lift the left control box, so that the levers and pedals are in a
locked state.
10)
Place the shut-off valve for
attachments in locked position.
Install a screw plug on the elbow.
11)
Keep the machine clean and store it
in a dry place.
ATTENTION: When storing the machine, position the machine as shown in the
Содержание YC20SR
Страница 28: ...19 Warning sign Maintenance warning Swing lock sign ...
Страница 53: ...44 3 4 2 Cigarette lighter 3 5 Monitor ...