Yuchai YC20SR, Руководство по эксплуатации

Страница: 43 / 152

34

Do not leave the machine unattended while refueling.

The fuel must not spill onto overheated surfaces or the electrical parts.

After refueling, wipe off any spilled fuel or oil and tighten the fuel and oil tank
cap tightly.

Remove any leafs, pieces of wood, paper and other flammable materials from the
engine, exhaust pipe, muffler and engine compartment.

No oil-soaked rags should be placed inside the machine to avoid spontaneous fire
and combustion.

Keep a fire extinguisher easily accessible in the cab.

When welding the machine, it is strictly forbidden to do it without isolating the
hydraulic oil line and fuel line.

To prevent fires caused by hydraulic lines: Check that all hose and tube clamps,
shields and cushions are securely fastened in place. If they are loose, they might
vibrate and rub against other parts during operation, causing damage to the hoses
and high pressure oil to spurt out, resulting in fire hazards or serious injuries.

The battery should be kept away from the fire source and avoid high temperature,
otherwise it may explode.

User should check the seal of the isolation board to prevent engine exhaust gas
from entering the cab.

It is strictly forbidden to operate in poorly ventilated areas to prevent the driver
from suffocation.

In case of fire, do not use water to extinguish it, you should use powder fire
extinguisher or use sand to press out the fire. Or you can use cover or tarp to put
out the fire.