Yuba FLIP FLOP, Инструкция по эксплуатации

Страница: 3 / 6

4. PRE-ASSEMBLY
Although the Flip Flop is 80% assembled, there are a few steps that must be completed before it is ready to ride.
It is recommended that you have your bike built and tuned by a trained bicycle mechanic. If you have questions or
concerns about any of these steps, please see a bicycle dealer or contact YUBA toll free at 877 889-YUBA.
The tools needed to assemble the Flip Flop are not provided. You will need an adjustable wrench and an M5 allen
key.
Carefully follow the Flip Flop Assembly Instructions on the following page. Never allow use of a Flip Flop balance
bike that is not properly assembled.
Inside your box you will find:
• 1 - Flip Flop Balance Bike frame
• 1 - fork
• 1 - rear wheel
• 1 - rear carrier
• 1 - headset
• 1 - saddle with seat post (to be installed)
• 1 - handle bar (to be installed)
• 1 - front wheel (to be installed)
RISK OF SUFFOCATION
Plastic bags and films can be
dangerous. Keep bags and film
away from babies and children.
Discard safely.
WARNING!
!
CHOKING HAZARD -Small parts
Not suitable for children under 3
years of age.
WARNING!
!
• Adult assembly is required.
• Adult supervision is required.
• Maximum rider weight is 60lbs (27kg).
• Maximum cargo weight is 5lbs (2.25kg).
• Only one rider at a time.
• Obey all traffic laws.
• Ride on smooth paved surfaces away from motor vehicles.
• Do not ride near sloped or steep inclines.
• Do not ride at dusk, night or times with limited visibility
• Do not ride during times of unfit weather.
• Do not sit in the carrier
• Always wear shoes when riding.
• Always use safety equipment such as helmets, knee pads,
elbow pads and gloves.
• Replace worn or broken parts immediately.
• Check bolts regularly
• Explain to child how to stop with his/her feet
WARNING!
!
This toy requires advanced motor
skills to prevent falls and injury.
Assess skills before use.
CAUTION!
!
2