Yuba FLIP FLOP, Инструкция по эксплуатации

Страница: 4 / 6

6. ASSEMBLY INSTRUCTIONS
Please refer to the diagrams located on the next page for reference.
Small adjustable wrench M5 Allen
Small Rider Bike Assembly
1. Unbox all items.
2. Install front fork assembly onto frame.
3. Install handlebar into stem clamp.
4. Install seat with seatpost clamp.
5. The Flip Flop is now ready to ride in smallest assembly form.
Large Rider Bike Assembly
6. If you wish to flip the Flip Flop to accommodate a larger rider follow the next few steps.
7. Disassemble frame by removing handlebars, fork, headset, seat, seatpost clamp, rear wheel and rear rack.
8. Flip the frame
9. Reinstall the rear wheel with safety washer in place.
10. Reinstall rear rack and fasten screws, then axle nuts. Cover axle nuts with included protective caps.
11. Reinstall the fork and handlebars.
12. The Flip Flop is now ready to ride in largest assembly form.
7. ACCESSORIES
Please visit yubabikes.com to view information on Flip Flop add-ons as well as the full range of Yuba Bicycles.
8. LIMITED WARRANTY
The Flip Flop frame including carrier is warranted against breakage for two years from date of purchase to be free
from defects in materials and workmanship subject to the conditions and limitations set forth below. Yuba’s sole
obligation under this warranty is to repair or replace the product(s), at Yuba’s option. The components and parts
assembled on the Flip Flop are not covered under this warranty. This warranty does not cover damage due to wear
and tear, overloading, misuse, abuse, or anything else beyond Yuba’s direct control.
A partial list of preventable damage not covered by this warranty: rusting of the Flip Flop frame; bending of the Flip
Flop chain stays by overloading; failure of the Flip Flop’s rear wheel; bending of the carrier.
Yuba will be the sole arbiter of whether or not damage is due to defects in materials and workmanship.
This warranty applies only to the original owner and is nontransferable.
Prior to servicing a warranty customer, you must request authorization for return, repair or replacement from Yuba or
your regional distributor.
Warranty claims require proof of purchase and must be made through an authorized dealer.
Any postage, insurance or shipping costs incurred in sending your Yuba components for service are your
responsibility.
Small rider bike assembly
Large rider bike assembly
3