4
OUTDOOR SENSOR
1. transmission active (red LCD blinks at the same time)
2. selected channel
3. temperature
4. rel. humidity
A. press to select the channel
B. press to display the temperature in °C or °F
START UP
Important information
•
Please insert the batteries in the remote temperature transmitter first, thereafter in the
receiver
•
Obstacles can severely impair the range of the transmitter.
•
Protect the transmitter against direct sunlight.
•
The weather forecast is only ready for operation 12 hours after the batteries are
inserted.
TO GET STARTED, FOLLOW THESE DIRECTIONS:
•
Shift down the table stand (battery cover) on the back of the outdoor sensor case.
Open the battery compartment by unscrewing the two screws. Install the batteries
matching the marked polarity. Note the two buttons above the battery cradle. One
marked “°C°/F°” and the other marked “CH”. The Celsius (C) or Fahrenheit (F) Scale
can be selected for the LCD readout of this remote sensor by pressing the C/F button.
When you press the “CH” button this will change the transmitted channel. Make sure
that the CH1 (or CH2 or CH3) appears on the sensor's LCD. After that, close the
battery compartment again. During the setup, keep the outdoor sensor close to the
base station (about 1-2m distance) in order to establish an effective wireless
transmission. Do not place the remote sensor outside until transmission has been
confirmed.
