![background image](http://html1.mh-extra.com/html/yt-industries/jeffsy-primus/jeffsy-primus_manual_915378005.webp)
y t
0 9
0 8
y t
EN
REAR DERAILLEUR ASSEMBLY
Please follow the
torque specifications of
the manufacturers.
Make sure the bike is standing safely on the
rear axle stand.
Turn the rear axle stand on its side. Carefully
cut the cable tie using a wire cutter. Remove
the bubble wrap and the foam transport
protection from the chainstay.
Screw the derailleur bolt in, but do not tighten
it yet in order to be able to align the derailleur
properly in the next step (5 mm Allen key).
Use a torque wrench to tighten the derailleur
bolt. Make sure that the derailleur tab sits
against the corresponding tab on the derail-
leur hanger. Hold the derailleur in place with
your second hand to avoid it rotating out of
position and leaving a gap between the tabs.
SDG
HANDLEBAR ASSEMBLY 24"
Please follow the
torque specifications of
the manufacturers.
Remove the handlebar clamp on the stem by
removing all screws (Allen key 4 mm ).
Install the handlebar. Mount the handlebar to
the stem (Allen wrench 4 mm).
Mount the handlebar to the stem (Allen wrench
4 mm). Tighten the screws in an X pattern. Do
it step by step with just one turn per screw at
a time.This is the only way to achieve an even
clamping of the handlebar in the stem.
Make sure that the clamp gaps of the stem
bolts are even, and that the handlebar is
correctly centered and aligned in the stem
– there are markings to assist you with this.
Torque all bolts precisely to the spec indicated
by the stem and/or handlebar manufacturer.
2.2.1
2.2.2
2.2.3
2.2.4
3.4
3.1
3.2
3.3
Содержание Jeffsy Primus
Страница 1: ...read first then unpack erst lesen dann auspacken D abord lire ENSUITE DEBALLER rTFM 2 0 2 1 ...
Страница 18: ...bevor es losgeht gibt s hier noch Infos zur Einstellung und pflege deines Bikes yt 35 34 yt DE IT S DONE ...
Страница 30: ...yt 59 58 yt family is nothing you choose usually thank you for choosinG US and Welcome to the YT Family ...