YT Industries Jeffsy Primus, Руководство пользователя

Страница: 4 / 31

y t 0 7 0 6 y t
EN
E13
UNBOX YOUR BIKE HANDLEBAR ASSEMBLY 26"
Cut the packaging straps using wire cutters
or a box cutter. Just make sure not to dam-
age the YT BikeBox
.
Now you can pull out
the flaps and open it.
Lift the wheels out of the box. Put the wheels
in a safe place on the side of the box.
Now you can lift your bike upwards, out of
the box. Place the frame on the front/rear axle stand.
Make sure the bike is standing safely!
TIP: keep the box and the
packing materials for po-
tential future shipments
of your bike.
Remove the cable ties using a wire cutter.
Remove the stem screws and put them aside
(T25 Torx).
Install the handlebar. Mount the handlebar to
the stem. Start with the uppermost bolts, torqueing
down the top part of the stem clamps ac-
cording to the manufacturer’s specifications.
Take care not to leave a gap here (zero gap).
Only then should you secure the handlebar
with the lower bolts as well.
Make sure that the clamp gaps under the low-
er stem bolts are even, and that the handlebar
is correctly centered and aligned in the stem
– there are markings to assist you with this.
Torque all bolts precisely to the spec indicated
by the stem and/or handlebar manufacturer.
Please follow the
torque specifications of
the manufacturers.
2.1.1
2.1.4
2.1.2 2.1.3 1.1
1.4
1.2
1.3