YPHOS 03, Руководство по установке, Страница: 8 / 16

8
Mounting
Use a crosshead screwdriver to fix the fixture onto the
hull. During this step, sealant should be evenly squeezed
around the fixture.
If there is any dry spot around the fixture, repeat the
previous step and make sure that you apply more sealant.
Use a soft cloth to remove any excess of sealant. Add
extra sealant in the inner side of the hull, around the hole.
Tighten the screws only with a
hand tool - do not use power tools.
Let the Sealant Cure
Let the sealant fully cure before you launch the boat back
into the water and do not leave your boat unattended for
the first 24 hours. Inspect for leaks during this time and act
accordingly if needed.
Consult the sealant’s manufacturer guide to learn how long it takes
for the sealant to fully cure.
Apply the Sealant
Gently pull the fixture away from the hull. Apply a
continuous bead of sealant on the back of the luminaire
and inside the drilled holes on the hull. Align the fixture
with the pilot holes and press firmly against the hull.
Use 3M™ Marine Adhesive Sealant Fast Cure
4200FC or similar.