YPHOS 03, Руководство по установке, Страница: 6 / 16

6
Switch off power
This protects you and avoids damaging your equipment.
Isolate the battery or power supply to make sure that
your system is off.
Find the right spot
Select a flat surface to install the light fixture and make
sure that you have full access to the inner side of the
hull.
Make sure that no obstacles are restricting in any way
the mounting screws or the cable.
Recommended installation depth is 150-250mm
(6” - 10”) below the water line.
Inspect & Test the Light
Apply voltage to the light and confirm that it works as
intended before installation. Complete a connection
mock-up with all the necessary equipment before you
make any modification to the hull.
150 - 250mm
6” - 10”