- 19 / 23 -
Wireless connection to the outdoor sensor
•
Press the key “CHANNEL” to select a channel. You can read the
data of up to 3 sensors at one weather station.
•
Press and hold the key “CHANNEL” or 3 seconds to search for an
outdoor sensor.
Outdoor sensor notes
•
The channel of a transmitter can be changed with the channel
selection switch on the back of the transmitter, e.g. to avoid that
two outdoor transmitters occupy the same channel and block
each other.
•
Outdoor transmitters must be distributed to different channels.
Troubleshooting
The weather station obtains the accurate time with wireless
technology. As with all wireless devices, the reception can be affected
by the following circumstances:
•
Long transmitting distance
•
Nearby mountains and valleys
•
Amidst tall buildings
•
Near freeway, railway, airports, high voltage cable etc.
•
Near construction site
•
Inside concrete buildings
•
Near electrical appliances (computers, TVs, etc.)
•
Inside moving vehicles
•
Near metallic structures
Place the station at a location with optimal signal, i.e. close to a
window and away from metal surfaces or electrical appliances. Keep
in mind that the outdoor transmitter only has the optimal transmission
range in open area with no obstructions. Each obstruction between
the transmitter and the station (roofs, walls, floors, ceilings, densely
wooded areas, etc.) will effectively cut the transmission range in half.
Protection and care of this item
•
Do not expose the unit to extreme temperature, water or direct
sunlight.
