- 11 / 23 -
•
The unit shows a flashing 80, meaning minus 80 metres, the lowest
available altitude setting. Using the “+” button, step upwards to
the correct value for your altitude (to the nearest 10 metres). If
your location is at or above zero metres, keep pressing the +
button to move upwards through the negative altitude values,
until zero is reached, and then if appropriate keep pressing until
the desired positive value is reached.
Please note that the unit
will not display a + or – symbol against the altitude value
you choose.
•
When this is set, press the “HISTORY” button.
•
After pressing the “HISTORY” button, the weather symbol flashes;
press the "+" button to select the weather symbol that fits the
current weather, then press the “HISTORY”
button. Then, hPa
flashes: please use the + or – buttons to choose between the
atmospheric pressure units hPa or Hg. When done, press the
“HISTORY”
button.
•
Now leave the weather station alone and don’t do anything.
•
The weather station will now start connecting to the outdoor sensor.
This process takes about 3 minutes. While in progress, the
sensor reception symbol flashes (item 10 on the front view
diagram on page 5). Then the display shows the outdoor
temperature and humidity. In case of failure of reception, please
press and hold the
“CHANNEL"
button
for more than 3 seconds
to restart the search process again.
•
Then the automatic reception of the MSF radio signal starts after 3
minutes of outdoor reception. While this is in progress, the
flashing symbol “radio tower” appears in the time display area,
against the top-right of the time display. The weather station may
require 5 to 20 minutes for it to pick up the MSF radio signal; it
may fail, for example if it is near a computer or TV or WiFi hub or
mobile phone or similar electrical equipment, due to interference
– so keep it away from those kinds of things. Also please note in
some poor-reception areas, it can take longer, from a few
minutes to a few hours, or even until some time between 1 am
and 5 am. You can if required restart the MSF radio signal search
process by pressing the + and – buttons together,
simultaneously.
•
After MSF radio signal reception is successful, the display shows a
static “radio tower
”
symbol and the correct time and date. After
this, the only thing you now need to do is set the correct display
of your nearest city. For this, hold the Mode button for 3 seconds,
then you will see the year flashing; if necessary, press + until the
correct year shows, then keep pressing the Mode button until the
