![background image](http://html1.mh-extra.com/html/youjie/yj-hf500/yj-hf500_user-manual_3534412032.webp)
2 - 20
Scanner to Bioptic Communication
The following settings are used to set up communication between Youjie scanners and bioptic scanners.
Note: The scanner’s baud rate must be set to 38400 and the RS232 timeout must be set to 3000 in order to communicate with
a bioptic scanner. See "RS232 Baud Rate" on page 2-16, and
on page 2-19 for further information.
Scanner-Bioptic Packet Mode
Packet Mode On
must be scanned to set the scanner’s format so it is compatible with a bioptic scanner.
Default = Packet
Mode Off.
Scanner-Bioptic ACK/NAK Mode
Bioptic ACK/Nak On
must be scanned so the scanner will wait for an ACK or NAK from a bioptic scanner after each packet
is sent. The Scanner-Bioptic ACK/NAK Timeout (below) controls how long the scanner will wait for a response.
Default =
Bioptic ACK/NAK Off.
Scanner-Bioptic ACK/NAK Timeout
This allows you to set the length (in milliseconds) for a timeout for a bioptic scanner’s ACK/NAK response. Scan the bar
code below, then set the timeout (from 1-30,000 milliseconds) by scanning digits from the inside back cover, then scanning
Save
.
Default = 5100.
* Packet Mode Off
Packet Mode On
* Bioptic ACK/NAK Off
Bioptic ACK/NAK On
ACK/NAK Timeout
Содержание YJ-HF500
